Latest Products
Flight control stack MAMBA F405 MK2 V2 with ESC F55 6S 55A
- Product MPN: 17652
- Category:- Flight controllers,All products,Drone/drone system,Electronic FPV components
The MAMBA F405 MK2 V2 flight control stack with F55 ESC is a powerful and compact solution for FPV drones. The flight controller is equipped with a 168MHz STM32F405 processor, which provides high data processing speed and flight stability.The MAMBA F55 BLS 4IN1 ESC supports 55A constant current per motor, which allows you to use powerful motors for high-performance flights. Compact size and light weight - the flight controller has dimensions of 36x18x8mm and weighs 9g, and the ESC has dimensions of 45.0x41.0x6.8mm and weighs 14g, which is convenient for installation in most popular models of FPV drone frames.
Key features
- The flight controller is equipped with an STM32F405 168MHz processor
- Modern ICM-42688-P gyroscope
- Support for various CRSF/SBUS/IBUS/DSM receivers
- Built-in wind farm voltage stabilizers 3.3V/0.5A, 5V/2A, 9V/2A
- Reliable support for each DC 55A motor
- Dshot300/600 protocol ensures fast and accurate transfer of commands to the ESC
The MAMBA F405 MK2 V2 flight control stack with F55 ESC is a powerful and compact solution for FPV drones. The flight controller is equipped with a 168MHz STM32F405 processor, which provides high data processing speed and flight stability.The MAMBA F55 BLS 4IN1 ESC supports 55A constant current per motor, which allows you to use powerful motors for high-performance flights. Compact size and light weight - the flight controller has dimensions of 36x18x8mm and weighs 9g, and the ESC has dimensions of 45.0x41.0x6.8mm and weighs 14g, which is convenient for installation in most popular models of FPV drone frames.
Key features
- The flight controller is equipped with an STM32F405 168MHz processor
- Modern ICM-42688-P gyroscope
- Support for various CRSF/SBUS/IBUS/DSM receivers
- Built-in wind farm voltage stabilizers 3.3V/0.5A, 5V/2A, 9V/2A
- Reliable support for each DC 55A motor
- Dshot300/600 protocol ensures fast and accurate transfer of commands to the ESC
MAMBA F405 MK2 V2 flight controller
- Processor: 168MHz STM32F405
- Gyroscope: ICM-42688-P
- Barometer: no
- OSD: AT7456E
- Blackbox: 16Mb flash memory
- BEC:
- 3.3V/0.5A
- 5V/2A
- 9V/2A
- Receiver support: CRSF/SBUS/IBUS/DSM
- UART ports: 3
- ESC Signal: 4 Set
- LED power supply: yes
- LED controller: BF LED
- Buzzer: supported
- 12C: yes
- CURR: yes
- WPP protection: yes
- TVS protection: yes
- AIR UNIT port: yes
- USB: Type-C
- Firmware: BetaFlight
- BetaFlight Target: FURYF4OSD
- Dimensions: 36x18x8mm
- Weight: 9g
Speed controller MAMBA F55 BLS 4IN1 ESC 55A
- Input voltage: 16.8V~25.2V (3~6S Lipo)
- Constant current: 55A*4
- Peak current: 65A (10S)
- CURR: yes
- BEC: does not have
- Protocol: Dshot300/600
- Firmware target: BLHeli_S CH4fli
- TVS protection: Yes
- Power supply: 2x8pin sh1.0/AMASS Original XT60
- Dimensions: 45.0x41.0x6.8mm
- Weight: 14g
Mounting scheme: 30.5x30.5mm/M3
- 1 x MAMBA F405 MK2 V2 flight controller
- 1 x MAMBA F55 BLS 4IN1 ESC 55A speed controller
