Free Delivery
From $50

99% Customers
Feedbacks

365 Days
For Free Return

Payment
Secure System

Only Best
Brands

Matek F411-WTE flight controller for flying wing

Matek

Matek F411-WTE flight controller for flying wing

Available:Preorder

Product MPN: 16656
Category:- Flight controllers,All products,Drone/drone system,Electronic FPV components

€47,50

Pre-order

Description
Specifications

The Matek F411-WTE flight controller is an enhanced version of the Matek F411-WSE, featuring several upgrades including a new BMI270 gyroscope, SPL06-001 barometer, and full Softserial outputs. It also boasts an improved current sensor, dual camera power and BECs, and a new USB Type-C interface

Key Differences from Matek F411-WSE:

Gyroscope: Upgraded to BMI270
Barometer: New SPL06-001
Softserial Outputs: Two full Softserial outputs
Current Sensor: Enhanced with measurement capability up to 132A
BEC Output: Vx (5V/6V) now provides a constant current of 5A
Vbat Switch: On/off switch for video transmitter and camera
USB Connector: Vertical USB Type-C
Firmware Support: New MATEKF411TE target for iNAV

Recommendations:

The Matek F411-WTE comes with INAV 4.1.0 firmware pre-installed for quality control.
For firmware version INAV 5.0 and later, the MATEKF411TE target will be available in the INAV configurator.

Key Differences from Matek F411-WSE:

Gyroscope: Upgraded to BMI270
Barometer: New SPL06-001
Softserial Outputs: Two full Softserial outputs
Current Sensor: Enhanced with measurement capability up to 132A
BEC Output: Vx (5V/6V) now provides a constant current of 5A
Vbat Switch: On/off switch for video transmitter and camera
USB Connector: Vertical USB Type-C
Firmware Support: New MATEKF411TE target for iNAV

Recommendations:

The Matek F411-WTE comes with INAV 4.1.0 firmware pre-installed for quality control.
For firmware version INAV 5.0 and later, the MATEKF411TE target will be available in the INAV configurator.

Processor: STM32F411CEU6 100MHz
Accelerometer / Gyroscope: BMI270 (SPI)
Barometer: SPL06-001 (I2C)
OSD: AT7456E (SPI)
Black box: none
UART outputs: 2
PWM outputs: 6 (2 x motors, 4 x servos)
I2C ports: 1
ADC: 4 (VBAT, Current, RSSI, AirSpeed)
3 x LEDs for FC STATUS (blue, red) and 3.3V BEC indicator (red)
Full Softserial-TX: 2
Built-in inverter on UART2-RX for SBUS input: yes
Switchable inputs for two cameras: Yes
Vbat power on/off for video transmitter and camera: yes
PPM receiver: Not supported
WS2812 LED control: Yes
Beeper output: Yes
RSSI: Yes
Interface: USB-C
Firmware: iNAV
INAV target: MATEKF411TE (INAV4.1 or newer)
Mount: 22 x 22mm, hole diameter 2mm
Dimensions: 31 x 26 x 16.5mm
Weight: 10

PDB

Input voltage range: 6 ~ 30V (2 ~ 6S LiPo) with TVS protection
PDB/current sensing resistor: 90A continuous, 132A pulse
Current sensor: 132A (scale 250)
Battery voltage sensor (voltmeter): 1k:10k
Vbat for video transmitter and camera: ON/OFF switch
BEC 5V output
- Designed for flight controller, receiver, OSD, FPV camera, buzzer, 2812 LED module, GPS, AirSpeed module
- Continuous current: 1.5A, max. 3A (5 sec / min)
BEC Vx output
- Designed for servo drives
- Adjustable voltage: 5V by default, 6V by jumper
- Continuous current: 5A
BEC 3.3V output
- Designed for Baro / Compass / OLED and Spektrum RX modules
- Linear regulator
- Continuous current: 200mA