Latest Products
Matek H743-WLITE flight controller for flying wing
- Product MPN: 17024
- Category:- Flight controllers,All products,Drone/drone system,Electronic FPV components
Quality flight controller H743-WLITE from the famous brand MATEK System, from the line of flight controllers for flying wings. It is equipped with STM32H743VIH6 processor with 480MHz operating frequency, the latest ICM42688-P gyroscope, DPS310 barometer, OSD, seven UART ports, CAN port, 2x I2C, as well as 12 PWM outputs, 3 BEC and other interesting features.
Official Firmware Page for Matek H743-WLITE
Key features:
- Availability of 5V BEC output, which is designed for: flight controller, receiver, OSD, camera, squeaker, 2812 LED LED module, GPS module, AirSpeed
- BEC 9V/12V output which is designed for video transmitter, camera, gimbal, etc.
- MATEKH743 firmware available
Quality flight controller H743-WLITE from the famous brand MATEK System, from the line of flight controllers for flying wings. It is equipped with STM32H743VIH6 processor with 480MHz operating frequency, the latest ICM42688-P gyroscope, DPS310 barometer, OSD, seven UART ports, CAN port, 2x I2C, as well as 12 PWM outputs, 3 BEC and other interesting features.
Official Firmware Page for Matek H743-WLITE
Key features:
- Availability of 5V BEC output, which is designed for: flight controller, receiver, OSD, camera, squeaker, 2812 LED LED module, GPS module, AirSpeed
- BEC 9V/12V output which is designed for video transmitter, camera, gimbal, etc.
- MATEKH743 firmware available
FC H743-WLITE
- Processor: STM32H743VIH6, 480MHz, 512KB RAM, 2MB Flash
- Accelerometer / Gyroscope: ICM42688-P
- Barometer: DPS310 (I2C2)
- OSD: AT7456E
- Blackbox: MicroSD card slot (SDIO)
- UART ports: 7 (1,2,3,4,6,7,8) with built-in inversion
- PWM outputs: 13 (including LED pad)
- ADC(ADC): 6 (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
- LEDs: 3 for FC STATUS (Blue, Red) and 3.3V indicator (Red)
- I2C ports: 2
- CAN port: 1
- USB Type-C extender / squeaker
- Switchable inputs for dual camera use
- Switchable BEC: 9V/12V for VTX
- High precision current sensor, 220A range
- ADC voltage divider VB2: 1K: 20K
- Voltage divider ADC AirSpeed: 20K: 20K
- INAV TR / SA VTX control: yes
- Firmware:
- INAV: MATEKH743
- ArduPilot: MATEKH743
- Mounting: 25 x 25 mm, hole diameter 2mm
- Dimensions: 44 x 29 x 14.5mm
- Weight: 22g (with USB/buzzer adapter)
PDB
- Input voltage range: 6.8~30V (2~6S LiPo)
- Output for ESC: 1
- Battery voltage sensor 1K:20K (scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
- Current sensor: 220A, 3.3V ADC (scale 150 in INAV, 66.7 A/V in ArduPilot)
- Current sensing resistor: 90A continuous, 220A pulsed
- BEC 5V output
- Designed for flight controller, receiver, OSD, camera, beeper, 2812 LED LED module, GPS module, AirSpeed sensor
- Continuous current: 2A, (max.3A)
- BEC output 9V/12V
- Designed for video transmitter, FPV camera, stabilizer, etc.
- Continuous current: 2A, (max.3A)
- 12V option with jumper
- For stable 9V/12V output, input voltage must be > output voltage +1V
- BEC Vx output
- Designed for servo drives
- Adjustable voltage: 5V by default, 6V or 7.2V with jumper.
- Continuous current: 8A, (max. 10A)
- For stable Vx output, the input voltage must be > Vx voltage +1V
- BEC 3.3V output
- Designed for Baro / Compass module and external 3.3V peripherals
- Linear regulator
- Continuous current: 200mA
- 1x Matek H743-WLITE flight controller
- 1x USB(Type-C)/Sounder Extender (passive)
- 1x 20cm cable from JST-SH-6P to JST-SH-6P for USB adapter
- 2x 20cm cable from JST-GH-4P to JST-GH-4P for CAN and I2C port
- 1x Rubycon ZLH 35V 470uF capacitor
- 1x Dupont 2.54 pin set (connectors are not soldered to the board)
